Look out for the future, because you never know what it might bring…
Question #89072 posted on 03/30/2017 12:38 p.m.

Dear 100 Hour Board,

The water bottle filler in the Benson is the BEST that I've been able to find on campus so far. It shoots the water out really fast, allowing for the shortest, most efficient bottle filling stop. Are there any other bottle fillers that match the velocity of the one in the Benson? So far, all others I've tried seem so slow in comparison. Help a girl out, would ya?

-Dihydrogen Monoxide Addict


Dear You,

Ok, so first and foremost I want to apologize for taking so long to answer this question. First it took way longer to do the research side of it than I expected, then when I finally finished that I suddenly was hit with a long wave of homework and tests and such that I had to deal with which cut into my answering time significantly. But here I am now with the answer you have so patiently awaited.

So I decided to test (almost) all the water bottle fillers on campus to see how long it took them to fill my water bottle. But because that seemed like it would be too easy, I also decided I would rate each water bottle filler by how the water from it tastes in comparison to the tap water in my apartment. So, before starting I familiarized myself with the taste of my tap water to have a solid taste baseline, and I checked how much my water bottle can hold, finding out it hold a total of 24 fluid ounces or 3 cups. 


Here is a pic of my water bottle so you can have an idea (Yeah I know it's blurry. You'll just have to deal with it).

Once I had gathered this preliminary information I set off with Baby Z from our house (Zed was at work) and got started.


Me and Baby Z ready to start our adventure.

I started at the LSB, arriving there at about 2:00pm. I explored all 5 floors to make sure I didn't miss any hidden water bottle fillers, testing each one I came across to see how long it took to fill my water bottle. Baby Z fell asleep after about 10 minutes.


Tuckered out.

I proceeded to work my way through most of the buildings on campus leaving out the Law Building, the Tanner Building, the Hinkley Center, the Marriott, the Bean Museum, and a few others that didn't seem worth it to visit. The whole process took me far longer than I expected it to. 7 hours and 45 minutes to be precise, spread over three days. Over the course of this data collection, I also had to take 12 bathroom breaks, so yeah, I risked hyper-hydration poisoning for you. You're welcome. Just kidding, it honestly wasn't that bad, though I was pretty sick of tasting water by the end of it all.

Anyway, as for the data collection, I divided it by building, timing how long each individual filler took to fill my water bottle and then figuring out the flow rate in fl.oz./sec and taking an average for each building that had more than one water bottle filler. I also made a note of what type of water bottle filler each one was. I counted 4 different types of water bottle fillers which I labelled thusly:


"Normal" Filler, by far the most common on campus


"Different" Filler, there was only one of these and it's just colored differently from the normal ones


"Old Model" Filler, there are a few of these around and they generally tend to be slower but they make a lot of noise which makes it feel like it shouldn't be taking so long to fill your water bottle. Some older models also require you to push a button to dispense the water instead of having a sensor.


"Wilk Model" Filler, these only exist in the Wilk. Generally a bit slower.


I collected all this data, along with my personal taste rating for each fountain in an excel spreadsheet for you which I have included below. I listed the buildings in the order in which I visited them, the location of each filler within the building, the time it took to fill my water bottle in seconds, the flow rate in fl.oz./sec based on my water bottle holding 24 fl.oz. of water, and a taste rating of "Positive" - meaning better than my tap water - "Neutral" - meaning about the same as my tap water - and "Negative" - meaning worse than my tap water. Do note, that the taste rating are entirely subjective as you may have different opinions on how water tastes than I do, but I figure it can at least give you a decent idea of where the better tasting water is to be found.

Water Bottle Filler Info.xlsx

Okay, now that that's all out of the way, I will share with you some of the thoughts I had as I was wandering about campus filling and emptying and refilling my water bottle. I will organize them by the building in which the thought occurred.


LSB: "Okay, there are a ton of water fountains in this building but only one water bottle filler on each floor. What gives?"

Benson: "There is only one water bottle filler in the whole Benson/Nichols building but it definitely looks like it is indeed the fastest. It also tastes pretty great."

MARB: "There are way more water bottle fillers in this building than I ever realized."

Clyde: "I haven't been in this building since switching majors. I'm totally cool with that."

Kennedy Center: "Who even goes here??"

Eyring Center: "Okay this building is way more maze-like than I originally thought. Wait, there's a BASEMENT?!? Oh false alarm, just stairs leading down to a couple offices or classrooms or something."

SWKT: "Oh gosh... Okay, can't access the 12th floor so that's one less floor to check at least. Okay, really? Not a single water bottle filler on any of 11 floors?? Ridiculous."

McKay Building: "Okay, just don't even bother filling your water bottle here unless you have to. It's all to slow and tastes just mediocre."

Testing Center: "It's fitting that the Testing Center water bottle filler would taste this awful. Don't fill up here, it's not worth it."

Brimhall Building: "These aren't awful but the taste isn't my favorite. Pretty average as a building for filling your water bottle."

JFSB: "Just don't even use the filler that's outside the southeast corner of the building. It takes too long and it tastes awful. Not worth the trouble."

Fletcher Building: "Okay, so I could only access a small part of this building but considering how old it is, I'm fairly confident there's no water bottle fillers hidden in the parts I couldn't get to."

HFAC: "The best water in this building is from the fountain in the south foyer of the Madsen Recital Hall. Not a water bottle filler, but the taste totally makes it worth it to deal with filling your water bottle in a regular drinking fountain."

ASB: "Okay for real? Why does this building have so many water bottle fillers? And yet only 1 on the floor that sees the most traffic? So dumb."

Talmage: "THIS FREAKING BUILDING!!! I thought CS and Math majors were supposed to be logical! Why the actual heck is their building so convoluted?! Seriously, it's the architectural equivalent of spaghetti code."

Library: "The library is entirely too large for this... Also the second floor is ridiculous. How do people navigate down here?"

Smith Field House: "Whoa! There's an underground tunnel connecting the RB and the Smith Field House?! Okay, I did not realize the Smith Field House was this large. But really, only one water bottle filler? That seems silly for an athletic building."


So yeah, those were generally my musings as I went about collecting the data for this answer. The last thing I want to do here is just give a couple general notes. So first off, the fastest three water bottle fillers on campus are as follows:

1st: Benson at 4.28 seconds to fill my water bottle and a flow rate of 5.61 fl.oz/sec

2nd: Kennedy Center at 5.16 seconds to fill my water bottle and a flow rate of 4.65 fl.oz/sec

3rd: Library 4th floor by South Elevators, at 6.87 seconds to fill my water bottle and a flow rate of 3.49 fl.oz/sec

Third place was the most surprising to me since that particular water bottle filler is an older model and those tend to be slower than the normal models. The only problem with that one is that it shoots the water out so freaking fast that you'll probably get water all over the place and if you manage to successfully fill your water bottle to it's fullest that will be quite impressive (it took me like three tries to do it successfully).

The slowest filler on campus was the one in the main west hallway of the RB taking a full 32.4 seconds to fill my water bottle for a flow rate of 0.74 fl.oz./sec. That was very surprising to me since you'd think the athletic buildings would have better water bottle fillers than that. The filler I would rate the worst however is definitely the one outside the southeast corner of the JFSB. Yeah it's not the absolute slowest, but it's still one of the slowest ones on campus and it tasted the worst of all the ones I checked by far. So yeah, just don't even waste your time with that one.

Once again, I apologize for taking so long to get this answer out to you, but I hope my thoroughness in answering it makes up for my tardiness.

Best wishes in all your water bottle filling (and other) endeavors,

~Dr. Occam

posted on 03/31/2017 2:52 p.m.
I would just like to point out that, I believe just as of this week, there is a water bottle filler in the Fletcher Building on the main floor by the bathrooms. I tested it myself and it filled my 32 fl.oz bottle in 10.2 seconds (3.14 fl.oz/sec), putting it in 4th place. However, as I am a different person with a different bottle with a different timer, there is likely some experimental error here and I am unsure in which direction it would skew the data.

-Too Familiar with the FB